Sociologi. Service. Företagsorganisation och företagsledning. Administration. Transport Administration

ISO 9000:2015 describes the fundamental concepts and principles of quality management which are universally applicable to the following:

organizations seeking sustained success through the implementation of a quality management system;

customers seeking confidence in an organization's ability to consistently provide products and services conforming to their requirements;

organizations seeking confidence in their supply chain that their product and service requirements will be met;

organizations and interested parties seeking to improve communication through a common understanding of the vocabulary used in quality management;

organizations performing conformity assessments against the requirements of ISO 9001;

providers of training, assessment or advice in quality management;

developers of related standards.

ISO 9000:2015 specifies the terms and definitions that apply to all quality management and quality management system standards developed by ISO/TC 176.

ISO 18490:2015 specifies the form of the optotype, the quality requirements for the chart, the test procedure, and the acceptance level for near vision acuity of NDT personnel. It also addresses the qualification requirements for personnel permitted to carry out the test. ISO 18490:2015 only addresses near vision acuity under defined conditions similar to those encountered during routine NDT inspection. It does not address an individual's overall visual acuity and users are advised to consider the need for a general eye examination by specialist medical personnel to ensure general vision acuity is appropriate for job function. ISO 18490:2015 does not address colour vision requirements.

1.1 Purpose This document establishes the minimum requirements for the qualification and certification of personnel performing non-destructive testing (NDT), nondestructive inspection (NDI), or nondestructive evaluation (NDE) in the aerospace manufacturing, service, maintenance and overhaul industries. For the purposes of this document, the term NDT will be used and will be considered equivalent to NDI and NDE. In Europe, the term "approval" is used to denote a written statement by an employer that an individual has met specific requirements and has operating approval. The term "certification" as defined in 3.2 is used throughout this document as a substitute for the term "approval". Except when otherwise specified in the written practice, certification in accordance with this document includes operating approval. 1.2 Applicability This document applies to personnel who: - use NDT methods or equipment to test and/or accept materials, products, components, assemblies or sub-assemblies; - are directly responsible for the technical adequacy of the NDT methods and equipment used; - operate automatic interpretation or evaluation systems; - approve NDT procedures or work instructions; - audit NDT facilities; or - provide technical NDT support or training. This document does not apply to individuals who only have administrative or supervisory authority over NDT personnel or to research personnel developing NDT technology for subsequent implementation and approval by a certified Level 3. See Clause 8 regarding applicability to personnel performing specialized inspections using certain direct readout instruments. Definition Automated equipment refers to machinery and systems designed to perform tasks without human intervention. In a completely automated industrial process, these systems operate independently to execute various functions. 1.2.1 Implementation This document addresses the use of a National Aerospace NDT Board (NANDTB). NANDTBs are only used as specified per Annex C and it is not mandatory to have such a board for compliance with this document. Personnel certified to previous revisions of NAS410 or EN 4179 need not recertify to the requirements of this document until their current certification expires. 1.3 Methods 1.3.1 NDT methods This document contains detailed requirements for the following NDT methods: Eddy Current Testing (ET) Liquid Penetrant Testing (PT) Magnetic Particle Testing (MT) Radiographic Testing (RT) Shearography Testing (ST) Thermographic Testing (IRT) Ultrasonic Testing (UT) 1.3.2 Other methods When invoked by engineering, quality, cognizant engineering organization or prime contractor requirements, this document applies to other current and emerging NDT methods used to determine the acceptability or suitability for intended service of a material, part, component, sub-assembly or assembly. Such methods include, but are not limited to, acoustic emission, neutron radiography, leak testing, and holography.

This document provides a framework that applies to all resources and specifies how to describe resources. It includes rules governing the way in which descriptions are made. This document provides principles, rules and structures for specifying the description of any type of resource; it identifies and establishes attributes for specifying properties, resources classes, vocabularies and application profiles and the rules governing their use. The key principles set out in this document are framed in a user-centric context and aim to meet the requirements of multilingual and cultural adaptability from a global perspective. This document can be used for the specification of metadata describing any type of resource (not only learning resources). This document is information-technology-neutral and defines a set of common approaches. This document specifies generic properties, generic resource classes and predefined rule sets for content value rules. These generic elements are proposed in such a way that they can be widely reused, thereby promoting interoperability. This document is applicable to the development of: — application profiles based on the ISO/IEC 19788 series but not part of it or any other document based on it, — standards consisting of the description of resources (in a broad sense), whether they belong to the domain of education or to any other domain.

ISO 17387:2008 specifies system requirements and test methods for Lane Change Decision Aid Systems (LCDAS). LCDAS are fundamentally intended to warn the driver of the subject vehicle against potential collisions with vehicles to the side and/or to the rear of the subject vehicle, and moving in the same direction as the subject vehicle during lane change manoeuvres. This standardization addresses LCDAS for use on forward moving cars, vans and straight trucks in highway situations.

This document gives guidance on how to promote and implement gender equality and women’s empowerment. It provides guidelines for organizations to develop the capabilities to achieve a culture of gender equality and women’s empowerment. The guidelines include the framework, resources, policies, tools and good practices for contextualizing, promoting and implementing gender equality. This document focuses on the inequality resulting from the gender specific roles assigned to women, girls, men and boys and is applicable to all types of organizations (public or private), regardless of their size, location or field of activity. This document does not address the specific aspects of relations with labour unions or work councils, nor the country-specific regulations and compliance relating to gender diversity.

This document specifies requirements on the development and implementation of a Safety Management System (SMS) and a Pipeline Integrity Management System (PIMS). The SMS is applicable for system operators of a gas infrastructure. The PIMS is applicable for system operators of gas infrastructure with a maximum operating pressure (MOP) over 16 bar. This document refers to all activities and processes related to safety aspects and performed by system operators of a gas infrastructure, including those activities entrusted to contractors. It includes safety-related provisions on operation of the gas infrastructure. This document is applicable to infrastructure for the conveyance of processed, non-toxic and non-corrosive natural gas according to EN ISO 13686 and gases such as biomethane and hydrogen and to mixtures of these gases with natural gas. This document covers also gases classified as group H, that are to be transmitted, injected into and from storages, distributed and utilized, as specified in EN 16726. For the requirements and test methods for biomethane at the point of entry into a natural gas network, reference is made to EN 16723-1. This document can be applied for gas infrastructure conveying gases of the 3rd gas family as classified in EN 437 or for other gases such as carbon dioxide. Specific requirements for occupational health and safety are excluded from this document. For these, other European and/or international standards, e.g. ISO 45001, apply. This document specifies common basic principles for gas infrastructure. It is important that users of this document are expected to be aware that more detailed national standards and/or codes of practice exist in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles. In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this document, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts). NOTE CEN/TR 13737 (all parts) contains: - clarification of relevant legislation/regulations applicable in a country; - if appropriate, more restrictive national requirements; - national contact points for the latest information.